Send All Calls; Using Remote Call Forwarding On A Single-Line Telephone - Avaya PARTNER Installation And Use Manual

Using Remote Call Forwarding on a Single-Line
Telephone
To forward your calls:
1. Lift the handset.
You hear intercom dial tone.
#11
2. Press
3. Dial your extension number.
4. Dial the two-digit Personal Speed Dial code (80-99) that contains the destination outside
telephone number at which you want the calls to ring.
To remove Remote Call Forwarding:
1. Lift the handset.
You hear intercom dial tone.
#11
2. Press
3. Dial your extension number twice.

Send All Calls

You can use Call Coverage or VMS Cover with Do Not Disturb buttons to send intercom and
transferred calls, DID calls, and outside calls on owned lines immediately to your voice mailbox:
If Call Coverage is on and a call that is eligible for coverage begins to ring, you can turn on Do
Not Disturb to send that call and any subsequent calls immediately to the covering extension.
This allows callers to receive coverage without waiting for the number of rings specified with
Call Coverage Rings.
If VMS Cover is on and a call that is eligible for coverage begins to ring, you can turn on Do
Not Disturb to immediately send that call and subsequent calls to your voice mailbox. This
allows callers to leave a message without waiting for the number of rings specified with VMS
Cover Rings.
If Call Coverage and VMS Cover are both on, you can turn on Do Not Disturb to send that
coverage call and all subsequent calls immediately to the covering extension. If there is no
answer at the covering extension, the calls go to your voice mailbox after the number of rings
specified with VMS Cover Rings.
.
.
Programming & Using Telephone Features
8
8

Send All Calls

8-63