Table of Contents
Advertisement
INDeX Set up
INDeX Set up
Naming the Installation
Installation Number
Date & Time Settings
Programming Manual
INDeX 9.1
The INDeX uses the installation name on fault reports and within downloaded
database copies.
To set the Installation name :
1. From the Administration menu, select System and then Installation.
2. Select Name and enter a name of up to 30 characters.
The installation number is used by R2 MFC service as the INDeX's CLI for return
calls. R2 MFC services are supported by the E1/R2 PRI cassette and R2/DID
ALOG cassette.
Set the installation number to the operator or similar suitable number.
To set the Installation Number :
1. From the Administration menu, select System and then Installation.
2. Select Number and enter the number (up to 20 digits).
The INDeX maintains a date and time clock for display on suitable terminals. The
INDeX also uses the date and time for features such as night service, call logging
and statistics, etc.
Note that within INDeX programming the time is always in 24-hour clock format.
You can change the date & time maintained by the INDeX from within INDeX
programming. You can also alter the way display terminals show the time and date.
The INDeX date and time can also be changed from Windows Operator Consoles
and by user's with their Type set to system manager (see page 65).
To set the time & date :
1. From the Administration menu, select System and then Clock.
2. Select Time and enter the new value.
3. Select Date and enter the new value.
To set the time display mode :
1. From the Administration menu, select System and then Clock.
2. Select 24 hour DT time to switch it between yes and no.
To set the date display mode :
1. From the Administration menu, select System and then Clock.
2. Select Year on DT date to switch it between yes and no.
INDeX Set up - Page 16
38DHB0002UKDJ – Issue 3 (12/00)
Page 16
Advertisement
Table of Contents
