Hunt Group Extensions (#505) - Avaya PARTNER Installation And Use Manual

®
PARTNER Advanced Communications System Installation, Programming, and Use
You can assign a T1 line with DID to a calling group. However, you cannot assign a coverage path
for a calling group that has T1 lines with Direct Inward Dialing (DID). See
(DID)" on page 4-27.
Considerations
Extensions can be in more than one Calling Group. In addition, you can assign all extensions
in the system to one group—this helps in making paging announcements to all employees.
Do not assign extensions that connect auxiliary equipment (auto attendants, voice messaging
systems, fax machines, answering machines, hotline telephones, or doorphones) or
extensions assigned as External Hotline telephones to a Calling Group.
Users can make simultaneous announcements over the loudspeaker paging system and the
system telephones assigned to Calling Group 1. See
8-51.
You cannot assign a coverage path for a calling group that has T1 lines with Direct Inward
Dialing (DID).
Programming
To create a Calling Group:
f00ss#502
1. Press
2. At the Group: prompt, enter a group number (1–4).
3. At the Extension: prompt, enter the number of the extension to be programmed.
4. To assign or unassign the extension, press
1 = Assigned to group
2 = Not Assigned to group (the factory setting) 
5. Do one of the following:
To program another extension, press
appears on the display. Repeat Step 4.
To program another group, press
through 4.
6. Select another procedure, or exit programming mode.

Hunt Group Extensions (#505)

Use this feature to assign any number of extensions to a Hunt Group. When extensions are in a
Hunt Group, an incoming call searches or "hunts" for the first available extension. The system
supports up to eight Hunt Groups; however, Hunt Group 7 is used exclusively for the voice
messaging system, and Hunt Group 8 is used exclusively for transferring and detecting fax calls.
For instructions on ringing or paging extensions in a Hunt Group or transferring calls to a Hunt
Group, see "Group Calling—Ring/Page (I7G/I*7G)" on page
Groups of Extensions
4-36
4
"Simultaneous Paging (I*70)" on page
4
at extension 10 or 11.
D
until the appropriate value appears:
n p
or
N P
+
4
8-39.
"Direct Inward Dialing
until the extension number
and repeat Steps 2