Save Number Redial (F04) - Avaya PARTNER Installation And Use Manual

Save Number Redial (F04)

Use this feature to save into temporary memory the last outside number (up to 28 digits) dialed
from an extension with a system telephone. Use this feature to save a number before you hang up
on a busy or unanswered call. Once saved, the number can be redialed at any time. The number
stays in memory until a different one is saved.
Save Number Redial is available only on system telephones.
Considerations
Save Number Redial redials all digits dialed on the outside call for which the feature was
used, except account codes.
You can program a Save Number Redial button on a system telephone to access the feature
with one touch. Press the button to save the number, and press the button later to redial the
number.
You can program Save Number Redial on more than one button to save more than one
number.
Unlike Last Number Redial (F05), Save Number Redial lets you make other calls before
redialing the saved number.
System Speed Dial numbers cannot be saved by using this feature.
A Save Number Redial number can begin with a star code; the system automatically inserts a
delay based on the Star Code Dial Delay setting.
When you automatically dial the number displayed in the Caller ID Call Logging and Dialing
feature, you can save the number by using Save Number Redial.
If Save Number Redial is programmed on a button, it interrupts Call Screening (F25).
Programming
To program a Save Number Redial button:
f00
1. Press
2. Press a programmable button.
f04
3. Press
4. Program another button for this extension, or exit programming mode.
Using Save Number Redial
To save a number, from a system telephone, press the programmed button or
dialing the number, but before hanging up.
To redial a stored number, press the programmed button again or press
.
.
Programming & Using Telephone Features
8
8
8
8
f04
f04
after
again.
Redialing Features
8-59