Outgoing Call Restriction (#401) - Avaya PARTNER Installation And Use Manual

Outgoing Call Restriction (#401)

Use this feature to specify the types of outgoing calls that can be made on all lines at an extension.
Considerations
If the system is connected to a PBX or Centrex system and a dial-out code (usually 9) is
needed to place calls outside the PBX or Centrex system, the control unit may not be able to
prevent calls for extensions restricted to Local Only. If dialing restrictions are needed on
Centrex lines, use Centrex restrictions instead.
Outgoing Call Restriction also applies to lines that a user has access to with Direct Line
Pickup—Idle Line.
To override this feature, users can dial Marked System Speed Dial numbers and numbers
from an Allowed Phone Number List (#407) and the Emergency Phone Number List
(#406). Also, if a System Password (#403) is defined, MLS system telephone users can enter
it to override restrictions.
You can program a button on the system telephone at extension 10 to be used to quickly
change an extension's Outgoing Call Restriction setting. See programming for Outgoing
Call Restriction for information below.
If Star Code Dial Delay (#410) is active, the system checks for allowed and disallowed
telephone numbers again, beginning with the first digit after the star code.
If you want to restrict the use of star codes, include them in the Disallowed Phone Number
Lists.
Programming
To identify the types of outgoing calls that can be made on all lines at an extension:
f00ss#401
1. Press
2. At the Extension: prompt, enter the number of the extension to be programmed.
3. To change the type of call restriction, press
1 = No Restriction (can make toll, local, and intercom calls; this is the factory setting.) 
2 = Inside (intercom) Only
3 = Local (intercom and local) Only
4. To program another extension, press
the display. Repeat Step 3.
5. Select another procedure, or exit programming mode.
4
4
4
at extension 10 or 11.
D
until the appropriate value appears:
n p
or until the extension number shows on
Dialing Restrictions and Permissions
Programming System Options
4-25