8. Place the Autodialer on the desk to the
right of the telephone
(see
Figure
2-36).
9. Remove the plastic cover from the
autodialer and label the button sheet
extension numbers and corresponding
persons' names. Place the button
sheet on the Autodialer, and carefully
replace the plastic cover.
10. Adjust the height of the Autodialer to
match the system telephone.
If you unplug the telephone
connected to an Autodialer, you
must reset the Autodialer. To do
so, unplug the D8W line cord
(connected to the IN jack on the
bottom of the Autodialer) from
the J1 jack on the adapter; then
plug it back in.
Connecting Auxiliary Equipment
You can connect many types of telecommunications devices to your system without expensive
adapters or additional telephone lines—for example, answering machines, credit card scanners,
and fax machines. Many tip/ring, single-line devices work with the system regardless of the
manufacturer. See
auxiliary equipment, including voice messaging systems.
Chapter 9, "Using Auxiliary Equipment"
Figure 2-36. System Telephone and
Intercom Autodialer
2
for further details about connecting
Connecting Auxiliary Equipment
Installation
2-41