Programming; Using Call Coverage At A System Telephone - Avaya PARTNER Installation And Use Manual

®
PARTNER Advanced Communications System Installation, Programming, and Use

Programming

To program a Call Coverage button:
f00
1. Press
2. Press a programmable button, preferably a button with lights.
3. At this point, you can do one of the following:
f20
Press
f20
Press
f20
Press
covering extension.
4. Program another button for this extension, or exit programming mode.

Using Call Coverage at a System Telephone

To send calls for coverage manually:
f20
1. Press
2. Dial your extension number.
3. Dial the extension number of the covering extension.
To remove Call Coverage manually:
f20
1. Press
2. Dial your extension number twice.
To send calls for coverage by using the programmed button:
1. Press the programmed button.
If an originating extension and a covering extension were programmed on the button, Call
Coverage is activated (on a button with lights, the green light is on). Skip Steps 2 and 3.
2. If no originating extension was programmed, dial your extension number.
3. If no covering extension was programmed, dial the extension number of the covering
extension.
Call Coverage is activated (on a button with lights, the green light is on).
To remove Call Coverage by using the programmed button:
1. Press the programmed button.
If an originating extension and a covering extension were programmed on the button, Call
Coverage is deactivated (on a button with lights, the green light is off). Skip Steps 2 and 3.
2. If no originating extension was programmed, dial your extension number.
3. If no covering extension was programmed, dial your extension number again.
Call Coverage is deactivated (on a button with lights, the green light is off).
Call Coverage (F20,XX,XX)
8-10
.
.
and the number of the originating extension.
, the number of the originating extension, and the number of the
.
.
8
8