Avaya PARTNER Installation And Use Manual page 336

®
PARTNER Advanced Communications System Installation, Programming, and Use
When you send a fax, an outside line is automatically selected. Incoming fax calls on the fax line
are answered automatically by fax 2. If a fax comes in on a line other than line A, you can transfer
the call to fax 2. If you have programmed a Fax Management button, you can transfer a call to the
fax machine with a single touch, as well as monitor the status of the fax machine. If fax 1 is set for
Delayed Ring on line A, fax 1 can pick up fax transmissions when fax 2 does not answer.
Programming Fax 1 (Send—Ext. X)
To program the send fax machine:
1. Do one of the following:
If extension X is a key extension, use Line Assignment (#301) to assign one or more
lines to extension X (including line A).
If extension X is a pooled extension, use Pool Line Assignment (#207) to remove line A
from all pools. Then use Pool Extension Assignment (#314) to assign pools to extension
X. Also use Line Assignment (#301) to assign line A and any other individual lines to
extension X.
2. Do one of the following:
If extension X is a key extension, set Automatic Line Selection for extension X to select
outside lines first (line A selected last).
If extension X is a pooled extension, set Automatic Line Selection for extension X to
select pools and outside lines first (line A selected last).
3. Set Line Ringing for line A at extension X to Delayed Ring; set all other lines and pools to No
Ring.
4. Set Automatic Extension Privacy (#304) for extension X to Assigned.
Make sure extension X is not assigned as a Call Waiting (#316) extension, Pickup
Group Extension (#501), Calling Group Extension (#502), Night Service Group
Extension (#504), or Hunt Group Extension (#505).
5. To monitor the fax machine at extension X, use Fax Machine Extensions (#601) to identify
extension X as a fax extension, and program a Fax Management button by programming the
fax machine extension number on an Auto Dial button.
Programming Fax 2 (Receive—Ext. Y)
To program the receive fax machine:
1. Do one of the following:
If extension Y is the key extension, use Line Assignment (#301) to assign only line A to
extension Y.
If extension Y is a pooled extension, use Pool Line Assignment (#207) to remove line A
from all pools. Then use Line Assignment (#301) to assign line A and any other
individual lines to extension Y.
2. If you want to dial out when fax 1 is unavailable, set Automatic Line Selection for extension
Y to select outside lines first (line A selected last).
Fax Machines
9-22
9
9