Line Coverage Extension (#208) - Avaya PARTNER Installation And Use Manual

®
PARTNER Advanced Communications System Installation, Programming, and Use
If you want to assign the line to a specific button, press
appears:
Line Assignment 15 L01
3 Select a Button
Then press a button with lights to assign the line to that button. If you use option 3 after a
line already has been assigned, the line moves from the old button to the new button you
select.
6. Do one of the following:
To program another line for this extension, press
appears on the display. Then repeat Step 5.
To program another extension, press
7. Select another procedure, or exit programming mode.

Line Coverage Extension (#208)

Use this feature to identify an extension as the "owner" of a specific outside line, so the extension
can activate Call Coverage or VMS Cover for that line.
Considerations
This feature applies only if you have a voice messaging system.
Only one owner can be assigned to a specific line. However, multiple lines can be owned by
the same extension.
This feature provides an alternative method of routing outside calls to the voice messaging
system for Call Answer Service.
This feature has no effect on the CO Line Ownership procedure in PARTNER Messaging,
PARTNER MAIL, PARTNER MAIL VS or the PARTNER Voice Messaging PC Card.
An extension's "owned" line is eligible for coverage only if Line Ringing is set to Immediate
Ring or Delayed Ring and Line Access Restriction (#302) or Pool Access Restriction
(#315) is set to No Restriction or In Only.
Use Call Coverage to redirect an extension's calls on owned lines to the covering extension.
Use Call Coverage Rings (#320) to specify the number of times a call rings at the owner's
extension before it is sent to the covering extension.
Use VMS Cover or Automatic VMS Cover (#310) to redirect the extension's calls on owned
lines to the voice messaging system.
Use VMS Cover Rings (#321) to specify the number of times a call rings at the owner's
extension before it is sent to the voice messaging system.
To use Call Screening (F25), the station must be the Line Coverage Extension for that line.

Line Coverage Extension (#208)

4-48
3
. A display like the following
n
or
N P
4
4
p
until the line number
and begin at Step 2.