Setting Date And Time - Avaya XT Series Deployment Manual

Manually setting up the XT Series

Setting Date and Time

About this task
You can set the date and time from either the endpoint or the web interface.
Procedure
1. Access the date and time settings. From the endpoint's main menu, select Configure >
Advanced > System > Date & Time > General. From the XT Series web interface, select
Administrator Settings > System > Date & Time.
2. Set the date and time, as described in
page 118.
If you set Internet time to Yes, you cannot modify the date and time fields.
Table 18: Configuring date and time settings
Field Name
Day, Month, Year,
Time Format, Hour,
Minutes
Internet time
August 2020
Figure 52: Date and Time
Table 18: Configuring date and time settings
Description
Enter the date, time format, and time.
Select Yes to synchronize the system clock with the network clock, thus
allowing you to align devices connected to the Internet using Network
Time Protocol (NTP).
Deployment Guide for Avaya XT Series
Comments on this document? infodev@avaya.com
on
Table continues...
118