Pool Programming; Mode Of Operation (#198); Pool Access Restriction (#315) - Avaya PARTNER Installation And Use Manual

®
PARTNER Advanced Communications System Installation, Programming, and Use

Pool Programming

When a system is operating in Hybrid mode, you can group lines into pools to help the routing of
calls. Use the following features to program the use of pools in the system:
Mode of Operation
Pool Access Restriction
Pool Extension Assignment
Pool Line Assignment

Mode of Operation (#198)

Use this feature to change the operating mode of your system. Your system must be operating in
Hybrid mode to support the use of pools.
Programming
Follow these steps to change the mode of operation of the system to Hybrid mode:
f00ss#198
1. Press
2. Enter the system password which is 863285.
3. Enter the number for the mode of operation:
1 for Key (the factory setting) 
2 for Hybrid
The system resets.

Pool Access Restriction (#315)

Use this feature to restrict a pooled extension from receiving and/or making outside calls on all
lines belonging to a specific pool. For example, you may want customer service representatives to
make calls using the WATS lines that belong to auxiliary pool 881, but not receive incoming calls
on the lines in that pool; in this case, you assign pool 881 to the customer service representative's
telephones and restrict the pool to Out Only.
This procedure is the most extreme way to restrict dialing. For example, an extension set to In
Only or No Access for a particular pool cannot select that pool to dial out—even for numbers on
the Emergency Phone Number List (#406).
Pool Programming
4-50
4
4
4
.
4