Programming; Using The Outgoing Call Restriction Button - Avaya PARTNER Installation And Use Manual

®
PARTNER Advanced Communications System Installation, Programming, and Use
Rather than using an Outgoing Call Restriction Button, you can use Outgoing Call
Restriction (#401) to change an extension's Outgoing Call Restriction setting through
System Programming if you prefer.
You must use an Auto Dial button with lights to designate the extension you want to change
after you press the Outgoing Call Restriction Button. You should use an Auto Dial button
on the PARTNER-CA48 Intercom Autodialer. However, you can use an intercom Auto Dial
button on the system telephone at extension 10, provided the button has lights.

Programming

To program an Outgoing Call Restriction Button at extension 10:
f00ss#114
1. Press
2. Do one of the following:
If you want to assign Outgoing Call Restriction to the first available button, press
D
until a display similar to the following appears:
Outgoing CallRstr Button
1 Assigned - Ext10
If you want to remove the Outgoing Call Restriction Button assignment, press
until a display similar to the following appears:
Outgoing CallRstr Button
2 Not Assigned (the factory setting) 
If you want to assign Outgoing Call Restriction to a specific button, press
similar to the following appears:
Outgoing CallRstr Button
3 Select a Button
Then press a programmable button with lights to assign Outgoing Call Restriction to that
button.
3. Select another procedure, or exit programming mode.
4. Label the Outgoing Call Restriction Button at extension 10.

Using the Outgoing Call Restriction Button

To change an extension's Outgoing Call Restriction setting:
1. Press the Outgoing Call Restriction Button at extension 10.
The green light next to the Outgoing Call Restriction Button turns on, and extension 10
appears busy to the system.
Outgoing Call Restriction Button (#114)
7-18
7
at extension 10.
7
D
3
. A display