Avaya PARTNER Installation And Use Manual page 258

®
PARTNER Advanced Communications System Installation, Programming, and Use
Programming
To program a Call Log Display button:
f00
1. Press
2. Press a programmable button with lights.
f23
3. Press
4. Program another button for this extension, or exit programming mode.
Using the Caller ID Logging and Dialing Feature
When Caller ID information is logged for your extension and you have programmed a Call Log
button, the word Calls is displayed, as shown in
Figure 8-1. System Telephone Display Showing Logged Calls
0 2 /
10:53 a m
To view the log:
1. Press your preprogrammed Call Log button.
The green light flutters and the Call Log is activated. One of several messages appears.
2. Press the More button repeatedly until you see the Telephone Number Display (shown in
Figure 8-2).
Figure 8-2. Telephone Number Display
* 9 0 8
N e x t
On the Telephone Number Display, the newest call in the log is shown. The log shows the calls in
last-in-first-out order.
An Out-of-Area message appears if the call was dialed from a region that does not support
Caller ID. A Privacy message appears if the caller blocked transmission of Caller ID
information. A No Number message displays if no information was received.
Caller ID Features
8-22
.
.
2 6 W e d
- 5 5 5 -
P r e v .
8
8
Figure 8-1.
C a l l s
1 2 3 4
D i a l M o r e