Setting Date And Time - Avaya Scopia XT Series Deployment Manual

Table 22: Configuring basic SIP settings for the XT Series
Field
User
Authentication Name
Authentication Password
Use SIP Server
Server Address
2. Select Done to complete the Quick Setup Wizard.
3. To configure advanced SIP settings, such as the preferred transport protocol, see
Registering the XT Series to IP Office
Related links
Configuring Basic Settings with the Quick Setup Wizard

Setting Date and Time

About this task
You can set the date and time from either the endpoint or the web interface.
December 2017
Figure 63: Configuring basic SIP settings
Description
Enter the Extension Id of this XT Series, as configured in IP
Office.
When connecting over SIP, this name is displayed on the monitors
participating in the videoconference .
Enter the endpoint's Name, as configured in IP Office. This field is
case sensitive.
Enter the user's Login Code, as configured in IP Office.
Select Yes.
Enter the DNS name or IP address of the IP Office server, used to
register the endpoint.
Avaya Video Collaboration Solution for IP Office Deployment Guide
Comments on this document? infodev@avaya.com
Configuring Basic Settings with the Quick Setup Wizard
on page 88.
on page 96
103