System Password; Considerations; Using System Password - Avaya PARTNER Installation And Use Manual

®
PARTNER Advanced Communications System Installation, Programming, and Use
To unlock a single-line touch-tone telephone:
1. Lift the handset.
You hear intercom dial tone.
#21
2. Press
You hear intercom dial tone again.
3. Enter the four-digit code that you used to lock the extension.
If the code entered in Step 3 matches the code used to lock the extension, you hear
silence and the extension is unlocked.
If the code entered in Step 3 does not match the code used to lock the extension, you hear
fast busy tone and the extension remains locked. Repeat the unlocking procedure.

System Password

The System Administrator programs a four-digit password that you can enter from PARTNER and
MLS telephones to override dialing restrictions (if the extension has access to an outside line).

Considerations

The password overrides all dialing restrictions except Line Access Restriction and Pool
Access Restriction.
Once a password is programmed, you must enter it to turn Night Service on and off.
Additionally, if Night Service is on, users in the Night Service Group must enter the
password to make any outgoing calls (except calls to numbers on the Emergency Phone
Number List and Marked System Speed Dial numbers). Dialing restrictions for extensions
not in the Night Service Group remain the same as during normal daytime operation.

Using System Password

To use System Password:
1. Before lifting the handset or turning on the speaker at a PARTNER or MLS telephone, press
h
.
2. Enter the password.
The System Password does not appear on display telephones.
3. Press an outside line button (or press
i
(or press
4. Dial the number.
The password is in effect until you hang up the telephone.

System Password

8-70
.
and a three-digit access code), and lift the handset.
8
8
8
i8
and a two-digit line number) or a pool button