Avaya PARTNER Installation And Use Manual page 294

®
PARTNER Advanced Communications System Installation, Programming, and Use
Considerations
Last Number Redial redials all digits dialed on the last outside call except account codes.
You can program a Last Number Redial button on a system telephone to redial a number
with one touch.
You can use Save Number Redial (F04) to temporarily save the last number dialed. The
difference between Last Number Redial and Save Number Redial is that Save Number
Redial allows you to make other outside calls before redialing the saved number.
System Speed Dial numbers cannot be redialed with this feature.
A Last Number Redial number can begin with a star code; the system automatically inserts a
delay based on the Star Code Dial Delay setting.
A number dialed automatically by using the Caller ID Call Logging and Dialing feature can
be redialed with Last Number Redial.
Last Number Redial interrupts Call Screening (F25).
Programming
To program a Last Number Redial button:
f00
1. Press
2. Press a programmable button.
f05
3. Press
4. Program another button for this extension, or exit programming mode.
Using Last Number Redial on a System Telephone
To use Last Number Redial:
1. Lift the handset.
2. Press the programmed button or
Digits are displayed on system display telephones as they are dialed.
Using Last Number Redial on a Single-Line Telephone
To use Last Number Redial:
1. Lift the handset.
You hear intercom dial tone.
#05
2. Press
Redialing Features
8-58
.
.
f05
.
8
8
8
.
8