Avaya PARTNER Installation And Use Manual page 264

®
PARTNER Advanced Communications System Installation, Programming, and Use
You cannot forward group calls, calls to doorphone alert extensions, Voice Interrupt On Busy
calls, coverage calls, paging calls, transfer-return calls, Wake Up Service calls, and Night
Service calls.
You can program Cell Phone Connect on a button on a system telephone. Use a button with
lights if you want a visual indication when Cell Phone Connect is enabled. When the green
light is on, the Cell Phone Connect feature is enabled. (The display shows "Forward.")
If you press the Cell Phone Connect button after a call starts to ring, that call is not
forwarded.
If the Cell Phone Connect feature code, optional originating extension, and destination
personal speed dial code are programmed on a button with lights, you can use the button to
turn Cell Phone Connect on and off with one touch. (The lights show when Cell Phone
Connect is on, even if calls are forwarded to a different Personal Speed Dial code from the
one stored on the button, and you can still use the button to turn Cell Phone Connect off.)
An extension's outside calls on lines or pools assigned to the extension are eligible for Cell
Phone Connect only if Line Ringing is set to Immediate Ring or Delayed Ring and Line
Access Restriction or Pool Access Restriction is set to No Restriction or In Only.
If an extension in a Hunt Group activates Cell Phone Connect, the system considers the
extension unavailable when a call goes to the Hunt Group.
If an extension has VMS Cover and Cell Phone Connect active, calls ring at the Cell Phone
Connect destination extension; they are not covered by the voice messaging system.
If an extension has Call Coverage and Cell Phone Connect active, calls are routed to the
Cell Phone Connect destination. (Cell Phone Connect takes precedence).
Cell Phone Connect does not apply to parked calls. See
You cannot use Call Screening (F25) when the Cell Phone Connect feature is active.
You cannot forward calls to a System Speed Dial code.
The PARTNER system will forward only outside calls on lines that have reliable disconnect.
For these lines, Hold Disconnect Time (#203) must be set to a value other than 00 (No
Detection).
You can activate Cell Phone Connect while the Station Lock (F21) feature is enabled for
your extension.
If an Allowed Phone Number List (#407) is assigned to the extension, the destination
telephone number must be included in that list.
If a Disallowed Phone Number List (#404) is assigned to the extension, the destination
telephone number must not be included in that list.
The extension must have an available T1 line to forward the call to an outside number.
The PARTNER system uses the extension's Automatic Line Selection to determine which
line to use for the outgoing call.
You cannot make a voice-signaled call to an extension that has the Cell Phone Connect
feature active. (The call will not appear at the extension.)
If you transfer a call without announcing it to an extension that has the Cell Phone Connect
feature active, the caller will hear silence or music (if the Music On Hold feature is active)
during the transfer.
Cell Phone Connect (F11)
8-28
"Call Park" on page 8-14.