®
PARTNER
Advanced Communications System Installation, Programming, and Use
Programming
To change the way outside lines or pools ring at an extension:
f00ssc
1. Press
2. Enter the number of the extension to be programmed for Line Ringing.
The green lights next to the line or pool buttons show the current Line Ringing settings for all
lines or pools assigned to the extension. (If a line or pool is not assigned to a button, the green
light next to that button is off.) The following ringing options can be shown by the green light
next to the line or pool button:
Immediate Ring — on steady
Delayed Ring — flashes slowly
No Ring — flutters quickly
3. Press the line or pool button until the button light shows the correct setting (the setting for the
currently selected line or pool also appears on the display).
4. Continue programming, or exit programming mode.
Line Ringing
5-6
5
at extension 10 or 11.