Wake Up Service Button (#115); Considerations; Programming - Avaya PARTNER Installation And Use Manual

Advanced communications system
Hide thumbs Also See for PARTNER:
Table of Contents

Advertisement

®
PARTNER
Advanced Communications System Installation, Programming, and Use

Wake Up Service Button (#115)

Use this feature to program a button on the system telephone at extension 10 to schedule wake up
(or reminder) calls for system extensions. When a wake up call is scheduled, the system makes an
intercom call to the target extension at the scheduled time. If the first call is not answered or the
called extension is busy, the system makes a second attempt five minutes later.

Considerations

You must program a Wake Up Service Button on the system display telephone at extension
10.
You must program Wake Up Service on a button with lights. This feature is not supported on a
button without lights.
A scheduled wake up call occurs once in a 24-hour period. If you want to send a wake up call
at the same time on the next day, you must reschedule the call.
Wake up calls ring the target extension for approximately 30 seconds (or six rings).
Wake up calls are not placed to extensions assigned as doorphones.
Wake up time is based on System Time (#103).
If users answer a wake up call, they hear Music-On-Hold (#602) if it is Active. If Music-On-
Hold is Not Active, users hear silence.
Wake up calls ring at target extensions even if Do Not Disturb is active at the extension.
Wake up calls to a target extension that has Call Forwarding active ring at the extension—the
calls are not forwarded
Wake up calls that are not answered do not go to voice mail coverage, even if VMS Cover is
active at the target extension.

Programming

To program a Wake Up Service Button at extension 10:
f00ss#115
1. Press
2. Do one of the following:
If you want to assign Wake Up Service to the first available button, press
display similar to the following appears:
Wake Up Service Button
1 Assigned - Ext10
If you want to remove the Wake Up Service Button assignment, press
display similar to the following appears:
Wake Up Service Button
2 Not Assigned (the factory setting) 

Wake Up Service Button (#115)

7-20
7
7
7
at extension 10.
D
D
until a
until a

Advertisement

Table of Contents
loading

Table of Contents