Display Shows "Backup Failed:check Card; At Idle Extensions 10 And 11; Display Shows "Backup Failed:systembusy - Avaya PARTNER Installation And Use Manual

®
PARTNER Advanced Communications System Installation, Programming, and Use

Display Shows "Backup Failed:Check Card"

at Idle Extensions 10 and 11

Possible Cause 1: The Backup/Restore PC Card was removed while the backup was in progress.
What to do: Check to see whether the PC Card was removed. If it was not, go to Possible Cause
2. If it was, power down the system, reinsert the PC Card, and reapply power to the system. The
backup is rescheduled for the next day at 2:00 a.m.
Enter Backup Programming—Automatic (#123) and select Option 3 to clear the alarm display
(see "Clearing a Backup-Failure Alarm" on page
Possible Cause 2: The Backup/Restore PC Card or the processor module is corrupted.
What to do: Try to do a backup using the manual backup procedure—Backup Programming—
Manual (#124)—to test the system.
If the backup completes successfully, the problem may be solved. An automatic backup is
rescheduled for the next day at 2:00 a.m. Enter Backup Programming—Automatic (#123)
and select Option 3 to clear the alarm display (see
11-4).
If the backup fails, try to determine whether the problem is a corrupted PC Card or a corrupted
processor module by trying the backup twice using two different Backup/Restore PC Cards:
— If the system will not write to either PC Card, the processor module is probably corrupted;
call the helpline number listed on the front, inside cover.
— If the system writes to one of the PC Cards, the original PC Card is corrupted. See
"Obtaining Products" in the PARTNER Customer Support document to order a new
Backup/Restore PC Card.

Display Shows "Backup Failed:SystemBusy"

at Idle Extensions 10 and 11
Possible Cause: Changes were being made to system programming or central telephone
programming while a backup was in progress.
What to do: The backup is rescheduled for the next day at 2:00 a.m. Enter Backup
Programming—Automatic (#123) and select Option 3 to clear the alarm display (see
Backup-Failure Alarm" on page
Problems with Automatic Backup
11-22
11-4).
11-4).
1 1
"Clearing a Backup-Failure Alarm" on page
1 1
"Clearing a