System Time (#103); Automatic Daylight/Standard Times (#126) - Avaya PARTNER Installation And Use Manual

System Time (#103)

Use this feature to set the time that appears on system display telephones.
Considerations
Enter the time in 24-hour notation. In this scheme, the hours of the day are
(12 midnight) to
zeros when necessary.
The time appears on system display phones as a.m. or p.m. (not in 24-hour notation).
Programming
To change the System Time:
f00ss#103
1. Press
2. Enter a new time in 24-hour notation. For example, to set the time to 2:15 p.m., press
1415
.
A display similar to the following appears:
System Time
Data 1415
This time appears on system display phones as 2:15 p.
3. Select another procedure, or exit programming mode.

Automatic Daylight/Standard Times (#126)

This feature automatically updates the system clock for annual Daylight Savings Time and
Standard Time changes. Turn this feature off if you live in an area without daylight savings time.
Programming
To change the status of Automatic Daylight/Standard Time:
f00ss#126
1. Press
D
2. Press
1 = Active (the factory setting)
2 = Not Active
3. Select another procedure, or exit programming mode.
2359
(11:59 p.m.). Since each time must have four digits, use leading
until the appropriate value appears:

Initial System Programming
3
3
0000
3
at extension 10 or 11.
3
3
at extension 10 or 11.
Setting the Date and Time
3-11