Loudspeaker Paging System - Avaya PARTNER Installation And Use Manual

®
PARTNER Advanced Communications System Installation, Programming, and Use
Programming
To identify a Fax Machine extension:
f00ss#601
1. Press
2. At the Extension: prompt, enter the extension to which the fax machine is connected.
3. To assign or unassign the extension, press
1 = Assigned
2 = Not Assigned (the factory setting) 
4. To program another extension, press
on the display. Repeat Step 3.
5. Select another procedure, or exit programming mode.

Loudspeaker Paging System

Loudspeaker paging systems allow you to broadcast a message over a large area. The system
supports all Avaya paging systems, including the entire PagePac line. The system also supports
most paging systems from other manufacturers when the paging systems are connected using a
paging interface device. Follow these steps to connect a paging system to a line jack on the a
PARTNER module (see
If you connect a loudspeaker paging system from another manufacturer, a paging
interface may be required.
1. Insert the modular plug into an available line jack on a PARTNER module. A loudspeaker
paging system can be connected to a line jack on the following PARTNER modules:
PARTNER ACS R7.0 processor module
308EC module
362EC module
400E module, 400EC module.
200E module

Loudspeaker Paging System

9-26
n
Figure 9-11):
9
at extension 10 or 11.
D
until the appropriate value appears.
p
or until the extension number appears
9