Programming; Using Cell Phone Connect On A System Telephone - Avaya PARTNER Installation And Use Manual

Programming

To program a Cell Phone Connect button:
1. Program a Personal Speed Dial that contains the telephone number to which you want to
forward calls. See
f00
1. Press
2. Press a programmable button, preferably a button with lights.
3. Do one of the following:
f11
Press
f11
Press
f11
Press
Speed Dial code (80-99) that contains the destination outside telephone number at which
you want the calls to ring.
4. Program another button for this extension, or exit programming mode.

Using Cell Phone Connect on a System Telephone

To forward calls manually:
f11
1. Press
2. Dial your extension number.
*
3. Dial and the two-digit Personal Speed Dial code (80-99) that contains the destination
outside telephone number at which you want the calls to ring.
To remove Cell Phone Connect manually:
f11
1. Press
2. Dial your extension number twice.
To forward calls using the programmed button:
1. Press the programmed button.
If an originating extension,
the button, Cell Phone Connect is activated (on a button with lights, the green light is on).
Skip Steps 2 and 3.
2. If no originating extension was programmed, dial your extension number.
3. If no destination telephone number was programmed, dial
Speed Dial code (80-99) that contains the destination outside number at which you want the
calls to ring.
Cell Phone Connect is activated (on a button with lights, the green light is on).
"Personal Speed Dial" on page
.
.
and the number of the originating extension.
, the number of the originating extension,
.
.
*
, and a Personal Speed Dial code (80-99) were programmed on
Programming & Using Telephone Features
8
8-64.
*
, and the two-digit Personal
8
*
and the two-digit Personal
Cell Phone Connect (F11)
8-29