System Speed Dial; Considerations; Programming - Avaya PARTNER Installation And Use Manual

Programming

To reset the system, press
A display similar to the following appears:
Reset - Save All
When the reset is completed, the system is no longer in Programming Mode and the date and time
appear on the display.

System Speed Dial

Program a list of up to 100 frequently-dialed numbers for the system by using System Speed Dial.
After you have programmed the numbers, anyone on the system can dial a System Speed Dial
number by pressing
digit code, from 600 through 699, for that number. You can mark System Speed Dial numbers to
override dialing restrictions.
A System Speed Dial number can be up to 28 characters in length and can consist of the digits
* #
0–9, , , and the special dialing characters (see
the number to one of the codes 600 through 699.

Considerations

For instructions on entering special characters (such as Pause) in a number, see
You can store account codes as System Speed Dial numbers for use with the Account Code
Entry feature.
A System Speed Dial number can begin with a star code; the system automatically inserts a
delay based on the Star Code Dial Delay (#410) setting. To program, enter a Pause followed
by the star code and the telephone number. (For example, press
h*675551001
To program System Speed Dial numbers that override dialing restrictions, mark them by
entering a star
on the SMDR call report as
Marked Speed Dial number do not appear on displays.
A Marked System Speed Dial number can begin with a star code. To enter it, press
followed by the star code and the telephone number. (For example, press
**675551001
You cannot program System Speed Dial codes on Auto Dial buttons.
You can program System Speed Dial numbers only from extension 10 or 11, but you can use
them from any extension.
f00ss#728
f #
(or at intercom dial tone on a single-line telephone) and the three-
.)
*
before the telephone number. Marked System Speed Dial numbers appear
f
nnn, where nnn is the Speed Dial code. The digits in a
.)
Programming System Options
4
4
Appendix B, "Special Characters"). You assign
4
at extension 10 or 11.
Appendix B.
*

System Speed Dial

4-63