Hold Reminder Tone (#127); Considerations; Programming - Avaya PARTNER Installation And Use Manual

®
PARTNER Advanced Communications System Installation, Programming, and Use
D
3. Press
00 = No Detection
01 = 50 msec
02 = 100 msec
03 = 150 msec
04 = 200 msec
05 = 250 msec
06 = 300 msec
4. To program the next line, press
5. Repeat Step 4 for each line in the system.
6. Select another procedure, or exit programming mode.

Hold Reminder Tone (#127)

Use this feature to set the time interval at which the PARNTER system will provide a reminder tone
for a call on hold at a system telephone. When you place a call on hold, the PARTNER system will
provide the Hold Reminder Tone at your extension if the call remains on hold for the time interval
specified. You can disable the Hold Reminder Tone. (If you disable the Hold Reminder Tone, the
PARTNER system will not provide a reminder tone when a call is on hold.)

Considerations

When you program this feature via Set administration, the setting you specify will apply to all
analog lines. It will not apply to T1 lines. You must use the PARTNER ACS R7.0 PC
Administration software to program the Hold Reminder Tone for T1 lines.

Programming

To change the hold reminder tone time:
f00ss#127
1. Press
similar to the following appears, showing the current Hold Reminder Tone setting:
Hold Timer
5 60 seconds

Hold Reminder Tone (#127)

4-42
until the appropriate value appears:
n
07 = 350 msec
08 = 400 msec
09 = 450 msec
(the factory setting) 
10 = 500 msec
11 = 550 msec
12 = 600 msec
then repeat Step 3.
4
4
4
at extension 10 or 11. A display