Line Assignment (#301) - Avaya PARTNER Installation And Use Manual

®
PARTNER Advanced Communications System Installation, Programming, and Use
4. To program another extension, press
on the display. Then repeat Step 3.
5. Repeat Steps 3 and 4 for all extensions that you want to change.
6. Select another procedure, or exit programming mode.

Line Assignment (#301)

Use this feature to assign the outside lines that are available at an extension. If Loudspeaker
Paging Line (#617) is not assigned, the default order of line assignment to the buttons on a
system telephone is from left to right, starting in the bottom left corner (see
Loudspeaker Paging Line (#617) is assigned within the number of lines, it is skipped or replaced
depending on the order in which you performed Number of Lines (#104) and Loudspeaker
Paging Line (#617).
To put the lines in a different order, first use this procedure to remove all assigned lines; then
assign lines in the desired order. This procedure applies to key extensions or to individual lines on
pooled extensions.
Figure 4-1. Default Line Assignments

Line Assignment (#301)

4-46
n
Ext.
Intercom Intercom
p
or until the extension number appears
4
Message
Figure 4-1 below). If