Forced Account Codes; Forced Account Code Entry (#307) - Avaya PARTNER Installation And Use Manual

Forced Account Codes

When you set up forced account codes on the system, users at specific extensions must enter an
account code before they can dial outside calls. Setting up forced account codes involves two
features: Forced Account Code Entry and, optionally, Forced Account Code List.
See "Account Code Entry (F12)" on page 8-2
a telephone.

Forced Account Code Entry (#307)

This feature applies only to system telephones.
Forced Account Code Entry identifies extensions at which users must enter an account code
before making outside calls. The account code can be used to charge telephone calls to a
department or client.
Considerations
You can dial numbers on the Emergency Phone Number List (#406) without entering an
account code at a Forced Account Code Entry extension. You can make 911 calls from the
Forced Account Code extensions without entering the account code as long as 911 has been
entered into the Emergency Phone Number List.
You can enter account codes manually or by using System Speed Dial numbers, Personal
Speed Dial numbers, or Auto Dialing (but not Marked System Speed Dial numbers).
Automatic Line Selection does not apply for an extension programmed with Forced
Account Code Entry; you must manually select a line or pool after entering an account code.
Do not assign Forced Account Code Entry to an External Hotline (#311) extension.
If a System Password (#403) is required to override dialing restrictions for an extension, you
must enter it before entering the account code.
If SMDR is used, the account code assigned to incoming or outgoing calls prints on call
reports. If a Forced Account Code List exists, only valid account codes are printed on the
call report.
You do not need a forced account code to answer incoming calls.
Programming System Options
4
for instructions on entering forced account codes at
4
4

Forced Account Codes

4-33