Avaya PARTNER Installation And Use Manual page 286

®
PARTNER Advanced Communications System Installation, Programming, and Use
You can specify the Loudspeaker Paging system as a Hotline alert extension so that the
Hotline telephone can be used to make announcements over the loudspeaker.
You must administer a Loudspeaker Paging Line via Loudspeaker Paging Line (#617). If you
do not administer Loudspeaker Paging Line (#617), calls to I70 and I*70 will receive
intercept tone.
Programming
To program a Loudspeaker Paging button:
f00
1. Press
2. Press a programmable button.
i70
3. Press left
4. Program another button for this extension, or exit programming mode.
Using Loudspeaker Paging on a System Telephone
To make an announcement over the Loudspeaker Paging system:
1. Press the programmed button or
2. Speak into the handset. (To avoid feedback, do not use the speakerphone.)
Your voice is heard through the Loudspeaker Paging system.
If your paging system supports announcements to zoned areas, refer to the
instructions packaged with the paging device to make zoned announcements.
Using Loudspeaker Paging on a Single-Line
Telephone
To make an announcement over the Loudspeaker Paging system:
1. Lift the handset to hear intercom dial tone.
70
2. Dial .
3. Speak into the handset.
Your voice is heard through the Loudspeaker Paging system.
For touch-tone telephones only, if your Loudspeaker Paging system supports
announcements to zoned areas, refer to the instructions packaged with the paging
device to make zoned announcements.
Paging Features
8-50
.
.
i70
8
8
; then lift the handset.
8