Redialing Features; Programming; Using Record-A-Call; Last Number Redial (F05) - Avaya PARTNER Installation And Use Manual

If you press the Recall button while recording an intercom call, the entire conversation is
dropped.
You cannot join a call that is being recorded.
You cannot use Record-a-Call with Call Screening (F25).

Programming

To program a Record-a-Call button:
f00
1. Press
2. Press a programmable button with LEDs.
f24
3. Press
4. Program another extension, or exit programming mode.

Using Record-a-Call

To activate the feature, press the programmed feature button when active on an intercom or CO
call. The green LED at the feature button is turned on steady to indicate that feature activation has
been initiated. When PMVS connects, the LEDs become an alternating red and green flash.
Any one of the following deactivates Record-a-Call:
You press the Record-a-Call button again.
You hang up the call.
PMVS drops the call because the recording time limit was exceeded.
Call recording terminates because silence was detected on the line for 15 seconds.

Redialing Features

Use the following features to redial telephone numbers:
Last Number Redial
Save Number Redial

Last Number Redial (F05)

Use this feature to redial the last outside number dialed (maximum 28 digits). Last Number
Redial is useful for immediately redialing a busy number.
.
.
Programming & Using Telephone Features
8
8
8
8

Redialing Features

8-57