Avaya PARTNER Installation And Use Manual page 362

®
PARTNER Advanced Communications System Installation, Programming, and Use
Considerations
You must use Hunt Group Extensions (#505) to assign the extensions associated with the
voice messaging system hardware to Hunt Group 7.
If you set the VMS Hunt Schedule for Day Only or Night Only, you must use Night Service
Button (#503) to program a Night Service Button for extension 10.
When the VMS Hunt Schedule is set to Day Only and Night Service is turned off (in Day
mode), calls coming in on lines assigned to the hunt group are sent to the hunt group. If Night
Service is turned on (in Night mode), incoming calls do not go to the hunt group.
When the VMS Hunt Schedule is set to Night Only and Night Service is turned off (in Day
mode), calls coming in on lines assigned to the hunt group are not sent to the hunt group. If
Night Service is turned on (in Night mode), incoming calls go to the hunt group.
Programming
To change the VMS Hunt Schedule setting for the voice messaging system's Automated
Attendant Service:
f00ss#507
1. Press
2. Enter the line number.
The current setting is displayed.
D
3. Press
1 = Always (the factory setting) 
2 = Day Only
3 = Night Only
4. To set VMS Hunt Schedule for another line, press
appears on the display. Then repeat Step 3.
5. Select another procedure, or exit programming mode.
Voice Messaging Systems
9-48
until the appropriate value appears:
at extension 10 or 11.
n p
or until the line number
9
9