Toll Call Prefix (#402)
Use this feature to indicate whether users must dial a 0 or 1 before the area code to make a long-
distance call, or just the area code and number. Set Toll Call Prefix to reflect the dialing patterns
of your local telephone company.
Considerations
This feature affects the operation of dialing restrictions and permissions.
Programming
To change the Toll Call Prefix setting:
f00ss#402
1. Press
D
2. Press
1 = 0 or 1 required before Area Code and Number (the factory setting)
2 = Area Code and Number Only
3. Select another procedure, or exit programming mode.
Transfer Return Programming
By the factory setting, transferred calls return to the originating extension if they are not answered.
However, you can program the transferred call to return to another extension. And you also can
program the number of times a transferred call rings before it returns to an extension. Program the
following features for Transfer Return:
Transfer Return Extension
Transfer Return Rings
until the appropriate value appears:
Programming System Options
4
4
4
at extension 10 or 11.
4
Toll Call Prefix (#402)
4-65