Programming; Using Auto Dialing - Avaya PARTNER Installation And Use Manual

®
PARTNER Advanced Communications System Installation, Programming, and Use

Programming

To program an Auto Dial button:
f00
1. Press
2. Press a programmable button.
3. Enter an account code, PBX/Centrex feature access code, or one of the following:
Outside telephone number. Enter the telephone number (up to 28 digits) exactly as you
would dial it.
Extension number. Press the left
number. Press
signal an extension. For example, to program extension 20 for voice signaling, press
i20
Feature code. Enter the appropriate code. For example, to program a button to turn on the
message light at extension 20, press
button, the message light at extension 20 turns on.
4. Repeat Steps 3 and 4 to program additional Auto Dial buttons, or exit programming mode.

Using Auto Dialing

From a system telephone, to dial an outside number or extension number (you can lift the handset
S
or press , but you do not have to do so):
1. Do one of the following:
If you want to call on a specific line, press the line button (or press
two-digit line number).
If you did not lift the handset, the lights next to
on the speakerphone.
If you want to call by using a specific pool on a pooled extension, press the pool button (or
i
press
If you did not lift the handset, the lights next to
on the speakerphone.
2. Press the Auto Dial button on which the outside number or extension number is programmed.
The system automatically selects a line if you did not specify one, turns on the speaker (if you
did not lift the handset), and dials the Auto Dial number. The number being dialed appears on
a display telephone.
To use an Auto Dial button programmed with a feature code or account code, follow the directions
for the feature you want to use.
Auto Dialing
8-6
.
i
*
before the extension number to program the Auto Dial button to voice-
.
and dial the three-digit pool access code).
8
button, and enter the two-digit extension
f0920
. When you press the programmed
8
S !
and
S !
and
i8
and dial the
go on, and you are active
go on, and you are active