Contact Closure Group (#612) - Avaya PARTNER Installation And Use Manual

®
PARTNER Advanced Communications System Installation, Programming, and Use

Contact Closure Group (#612)

Use this feature to specify which system extensions can activate each Contact Closure. Before a
user can activate a contact closure, you must assign the user's extension to the Contact Closure
Group (#612) for that Contact Closure.
Considerations
If a Contact Closure is used to control a door lock and a doorphone is installed at that door,
you may want to assign the extensions in the Contact Closure Group to also be the
Doorphone Alert Extensions (#606) for that doorphone.
When an extension is included in the appropriate Contact Closure Group, the user at that
extension can use Contact Closure to activate the contact closure device.
Programming
To assign extensions to a Contact Closure Group:
f00ss#612
1. Press
2. At the Contact Number: prompt, enter the number for the Contact Closure (1 or 2).
3. At the Extension: prompt, enter the two-digit extension number that you want to assign to
this Contact Closure Group.
4. To assign or unassign the extension, press
1 = Assigned to the Contact Closure Group
2 = Not Assigned to the Contact Closure Group (the factory setting) 
5. Do one of the following:
To assign or unassign another extension to the same Contact Closure Group, press
n
or
To assign extensions to the other Contact Closure Group, press
P
Step 3.
6. Select another procedure, or exit programming mode.
Contact Closure Adjunct
9-12
p
until the correct extension appears. Then repeat Step 4.
, enter the number for the other Contact Closure (1 or 2), and then begin at
9
9
9
at extension 10 or 11.
D
until the appropriate value appears:
N
, press