Initial System Programming; Programming A Partner System; Overview; Pc Administration - Avaya PARTNER Installation And Use Manual

Initial System Programming

Overview

After you install the system hardware, you must program basic system settings, assign lines, and
customize extensions. To do this, you must understand the basics of programming.

Programming a PARTNER System

You can program a PARTNER system in either of the following ways:
from a PC running PARTNER ACS R7.0 PC Administration software (PC Administration)
from a system display telephone at extension 10 or extension 11 (Set Administration)

PC Administration

The PARTNER ACS R7.0 PC Administration software enables you to program and administer all
features for a PARTNER system from a local (that is, on-site) or remote PC. Using this application,
you can:
program features to the PARTNER system
set the date and time on the PARTNER system
copy buttons from one set to another
back up the programming (translations) from the PARTNER system to the PC card or the
internal flash memory in the PARTNER system
retrieve a copy of the translation from the PC card or the internal flash memory in the
PARTNER system to your PC
print the system programming information to a text file
retrieve and view diagnostic information from the PARTNER system
administer the DSL module
administer the T1 module
3
3
3
3
3
Overview
3-1