Automatic System Answer Delay (#110); Automatic System Answer Lines (#204) - Avaya PARTNER Installation And Use Manual

®
PARTNER Advanced Communications System Installation, Programming, and Use

Automatic System Answer Delay (#110)

Use this feature to specify the number of times (0–9) an incoming call should ring before it is
answered by Automatic System Answer.
Considerations
Automatic System Answer Delay works independently of Line Ringing, which determines
how an outside call rings at an extension—immediately, after a 20 second delay, or not at all.
Automatic System Answer Delay specifies the number of rings a caller hears before the
system answers the call.
If you use Caller ID, make sure Automatic System Answer Delay is set to 2 rings or more to
ensure that Caller ID information is captured.
If you use T1 lines with Direct Inward Dialing (DID) that are not administered for Direct
Inward Dialing (DID) in PARTNER ACS R7.0 PC Administration, set the number of rings to 1
ring or more.
Programming
To change the number of times an incoming call rings at extension 10 before the system answers
it:
f00ss#110
1. Press
2. To change the number of rings, press
number of rings can be from 0 to 9, with 0 meaning immediate answering of the call. The
factory setting is 2 rings.
3. Select another procedure, or exit programming mode.

Automatic System Answer Lines (#204)

Use this feature to identify the lines on which incoming calls should be answered by Automatic
System Answer.
Considerations
All lines programmed with Automatic System Answer should be assigned to extension 10.
Only outside calls on Automatic System Answer lines are answered automatically. Intercom,
transferred, and transfer-return calls are not answered automatically.
You can set Caller ID Log Answered Calls (#317) to Active to log calls on lines answered by
Automatic System Answer.
Automatic System Answer Features
7-6
7
7
7
.
D
until the appropriate value appears. The
7
7