Considerations; Programming - Avaya PARTNER Installation And Use Manual

Considerations

On system display telephones, Automated Attendant appears when a call is being
transferred from an auto attendant. The Caller ID information (if available) will be displayed
automatically after the transfer is completed. Transfer from AA or Transfer from Auto
Att appears when a call transferred by an auto attendant was not answered and is being
returned to your extension.
For each auto attendant extension, use Transfer Return Extension (#306) to identify the
extension to which a call should be routed if the destination extension does not answer.
Set Automatic Extension Privacy (#304) to Not Assigned for the auto attendant extension if
you want to be able to intercept calls routed to the device.

Programming

To identify an extension where an auto attendant is installed:
f00ss#607
1. Press
2. Enter the extension number to which the auto attendant is connected.
3. To assign or unassign the extension, press
1 = Assigned
2 = Not Assigned (the factory setting) 
4. To assign or unassign a second auto attendant extension, press
extension number appears on the display. Then repeat Step 3.
5. Select another procedure, or exit programming mode.
9
9
at extension 10 or 11.
D
until the appropriate value appears:
n
Using Auxiliary Equipment
p
or until the
Auto Attendant
9-9