Avaya PARTNER Installation And Use Manual page 200

®
PARTNER Advanced Communications System Installation, Programming, and Use
Using Hold on a System Telephone
Follow these instructions to place and retrieve a call on hold on a system telephone:
To place a call on hold on a system telephone, press
The green light next to the
To retrieve a call that you put on hold:
i
1. Press
2. If the handset is in the cradle, lift it up or press
You are reconnected to the held call. The green light next to the line or pool button changes to
on steady.
To retrieve a call that a person at another extension put on hold, press the button next to the
winking red light (or press
Using Hold on a Single-Line Telephone
Follow these instructions to place and retrieve a call on hold on a system telephone:
To place a call on hold, press the switchhook down once rapidly.
You hear intercom dial tone. The call is on hold. (Do not hang up the handset while the call is
on hold. If you hang up the handset, the telephone rings. Lifting the handset reconnects you to
the held call.)
To retrieve a call that you put on hold:
1. Hang up.
The call "rings back."
2. Lift the handset.
You are reconnected to the held call.
To retrieve a call that a person at another extension placed on hold:
1. Lift the handset.
2. At the intercom dial tone, dial
To answer a call when you are already on a call (you hear a call-waiting tone—two beeps):
1. Press the switchhook.
The first call is placed on hold and you are connected to the new call.
2. To return to the first call, press the switchhook again.
3. You can continue to press the switchhook to move between the two calls.
Handling Calls
6-24
i
, line, or pool button winks.
, line, or pool button next to the winking green light.
i68
and the two-digit line number).
68
and the two-digit line number.
6
h
.
S
.
6