Backup And Restore; Considerations - Avaya PARTNER Installation And Use Manual

®
PARTNER Advanced Communications System Installation, Programming, and Use
If the voice messaging system extension does not have Automatic Extension Privacy turned
on, other users can bridge onto the call. If a user bridges onto the call, a forward disconnect
signal is sent to the voice messaging system, causing it to disconnect from the call. This
causes the screening extension to be dropped from the call, and the person who bridged onto
the call is now talking to the calling party.
Programming
To change the Automatic Extension Privacy setting for an extension:
f00ss#304
1. Press
2. Enter the number of the extension to be programmed.
D
3. Press
1 = Assigned
2 = Not Assigned (the factory setting) 
4. To program another extension, press
on the display. Then repeat step 3.
5. Select another procedure, or exit programming mode.

Backup and Restore

You should back up the system programming periodically especially if you are changing the
processor module or upgrading the system, or before and after any major programming changes.
You can back up your system programming to either the internal memory of the PARTNER ACS
R7.0 processor or a Backup/Restore PC Card. You can back up the programming automatically or
manually. Occasionally, you may have to restore programming from the backed-up file. The
system may automatically restore a backup translation image if the system detects that the battery
backed up translation image is corrupted.

Considerations

Whenever you change the setting for Backup Programming—Automatic from Not Active to
Active Internal or Active PC Card, a backup occurs at the next occurrence of 2:00 a.m. After
that, backups are done at 2:00 a.m. on the first day of each month until you change the setting
back to Not Active.

Backup and Restore

4-4
until the appropriate value displays:
n
If you make any changes to the system programming, PARTNER ACS R7.0
will automatically back up the system programming to the internal memory of
the processor at 3 A.M. the next morning.
PARTNER ACS Release 7.0 supports the PARTNER Remote Access PC
Card, which allows you to program the system and perform backup and
restore functions remotely or locally with a PC.
4
at extension 10 or 11.
p
or until the extension number appears
4
4