Telephones - Avaya PARTNER Installation And Use Manual

®
PARTNER Advanced Communications System Installation, Programming, and Use

Telephones

The telephones supported by the PARTNER ACS fall into two categories:
System telephones—telephones specifically designed to work with the PARTNER ACS
Single-line telephones—touch-tone or rotary telephones, fax machines, card scanners,
modems, etc.
System Telephones
System telephones include the following:
PARTNER telephones
— PARTNER-34D
— PARTNER-18D
— PARTNER-18
— PARTNER-6
MLS telephones
MLC-6
©
TransTalk 9000-series wireless telephones
PARTNER ACS 7.0 supports PARTNER Endeavor telephones when an Endeavor 362EC module
is installed in the carrier. The Endeavor telephones include:
PARTNER Endeavor-34D
PARTNER Endeavor-18D
PARTNER Endeavor-18
PARTNER Endeavor-6
PARTNER system telephones have a built-in auxiliary jack to which you can connect a single-line
telephone. (See "Combination Extensions" on page
Only the PARTNER telephones are discussed in this guide (see
Telephones"). For information about an MLS, MLC, TransTalk 9000-series, or PARTNER
Endeavor telephone, refer to the documentation that came with the telephone.
Intercom Autodialers
PARTNER telephones support the PARTNER-CA48 Call Assistant Intercom Autodialer at
extensions 10 and 11. The autodialer provides Auto Dial buttons for all of the extensions in your
system. The status lights next to each button also indicate calling activity at that extension. You
can program the Auto Dial buttons for either intercom ringing, voice signaling, or manual
signaling. (Each user can have only one Auto Dial button—either on the system telephone or on
the autodialer—for another extension in the system.) The Auto Dial buttons allow you to dial,
signal, or transfer calls to system extensions with one touch.
System Components
1-12
1
1
9-3.)
Chapter 6, "Using the
1