Intercom Dial Tone (#309); Programming - Avaya PARTNER Installation And Use Manual

®
PARTNER Advanced Communications System Installation, Programming, and Use
Remove hotline extensions from Night Service Group Extensions (#504), Calling Group
Extensions (#502), and Hunt Group Extensions (#505).
Use External Hotline (#311) to identify an extension that automatically dials a programmed
outside number when a user lifts the handset.

Programming

To identify a hotline extension and its alert extension:
f00ss#603
1. Press
2. At the Extension: prompt, enter the hotline extension number.
3. At the Data - - - - - - - - - - - - prompt, enter the alert extension number (use 70 for the
loudspeaker paging system). A display similar to the following appears:
Internal Hotline Ext 33
Data 32
4. Do one of the following:
To change the hotline and alert extension numbers you just entered, repeat Steps 2 and 3.
To delete the existing hotline and alert extension numbers, press
To identify another hotline and alert extension pair, press
hotline extension number appears on the display. Then repeat Step 3.
5. Select another procedure, or exit programming mode.

Intercom Dial Tone (#309)

Use this feature to determine the type of dial tone that the system provides at an extension. It may
be necessary to change this setting to Machine (outside line) dial tone for an autodialing device,
such as a fax or modem, that has trouble making calls. For example, if you have a modem that
checks for outside line dial tone before dialing, use this procedure to change from Regular to
Machine dial tone.
Use this procedure only if an autodialing device has trouble making calls.
Programming
To change the Intercom Dial Tone setting for an extension:
f00ss#309
1. Press
2. At the Extension: prompt, enter the number of the extension to be programmed.

Intercom Dial Tone (#309)

4-44
4
at extension 10 or 11.
r
.
n p
or
4
4
at extension 10 or 11.
until the new