Chapter 8: Initial Configuration Of The Xt Series; Activating The Xt Series And Its Optional Features - Avaya Scopia XT Series Deployment Manual

Chapter 8: Initial Configuration of the XT
After connecting the system hardware and powering it on as described in
Hardware on page 35, perform the initial configuration as described in these sections:
Related links

Activating the XT Series and its Optional Features

Configuring Basic Settings with the Quick Setup Wizard
Configuring Monitors
Configuring Cameras
Configuring Microphones
Activating the XT Series and its Optional Features
About this task
When you are configuring the XT Series for the first time, you must first activate the software and
then, secondly, configure the XT Series using either the auto-provisioning (cloud) method or the
local (manual) method.
You need license keys to activate the XT Series for the first time, and to enable certain features
(like increased bandwidth or resolution). The available licenses depend on the model of your XT
Series, as described in
You first generate the license keys in the
Getting Started with Avaya PLDS). Once you have the license keys, you activate the XT Series
and any optional features you purchased, as described below the table. You can do this from the
endpoint itself or from its web interface.
Important:
Without a license key to activate the product, you can only use the system in preview mode
for 30 days (effective power on time, not calendar days).
December 2017
Series
on page 106
on page 111
on page 116
toc on page 2.
Avaya Product Licensing and Delivery System
Avaya Video Collaboration Solution for IP Office Deployment Guide
Comments on this document? infodev@avaya.com
Setting Up the XT Series
on page 93
on page 96
(see
93