Activating The Xt Series And Its Optional Features - Avaya Scopia XT Telepresence Deployment Manual

Hide thumbs Also See for Scopia XT Telepresence:

Table of Contents

Procedure

1. Open any of the supported internet browsers and access the XT Series login page by

entering the system's IP address, like http://1.2.3.4/.

2. Enter the username and password.

The default username for the web interface is Admin with the password 1234.

Important:

We recommend changing the default credentials after logging in for the first time, as

described in the Deployment Guide for Avaya Scopia

3. (Optional) Select the web interface language from the Language list.

4. Select Login.

Activating the XT Series and its Optional Features

About this task

When you are configuring the XT Series for the first time, you must first activate the software and

then, secondly, configure the XT Series using either the auto-provisioning (cloud) method or the

local (manual) method.

You need license keys to activate the XT Series for the first time, and to enable certain features (like

increased bandwidth or resolution). The available licenses depend on the model of your XT Series,

as described in

Activating the XT Series and its Optional Features

You first generate the license keys in the

Getting Started with Avaya PLDS). Once you have the license keys, you activate the XT Series and

any optional features you purchased, as described below the table. You can do this from the

endpoint itself or from its web interface.

January 2017

Figure 39: Logging into the XT Series web interface

on page 34

Avaya Product Licensing and Delivery System

Avaya Scopia

XT Telepresence Deployment Guide

Comments on this document? infodev@avaya.com

Activating the XT Series and its Optional Features

XT Series.

on page 51

on page 43.

(see

Table of Contents