Area Nssa Translator-Stab-Intv - Dell PowerConnect 8024 Cli Reference Manual

Default Configuration
The default role is candidate.
Command Mode
Router OSPF Configuration mode.
User Guidelines
This command has no user guidelines.
Example
The following example configures the translator role of the NSSA.
console(config-router)#area 20 nssa translator-role always

area nssa translator-stab-intv

Use the area nssa translator-stab-intv command in Router OSPF Configuration mode to
configure the translator stability interval of the NSSA.
Syntax
area-id
area nssa translator-stab-intv
area-id
no area nssa translator-stab-intv
area-id — Identifies the OSPF NSSA to configure. (Range: IP address or decimal from
•
0–4294967295)
integer — The period of time that an elected translator continues to perform its duties after it
•
determines that its translator status has been deposed by another router. (Range: 0–3600)
Default Configuration
This command has no default configuration.
Command Mode
Router OSPF Configuration mode.
User Guidelines
This command has no user guidelines.
Example
The following example configures the translator stability interval of the area 20 NSSA.
console(config-router)#area 20 nssa translator-stab-intv 2000
integer
733
OSPF Commands