Juniper JUNOS OS 10.4 - FOR EX REV 1 Manual page 3220

Complete Software Guide for Junos
Verification
Purpose
Action
3116
®
OS for EX Series Ethernet Switches, Release 10.4
lldp-med {
interface ge-0/0/14.0;
}
dot1x {
authenticator {
authentication-profile-name profile52;
interface {
ge-0/0/14.0 {
supplicant single;
}
}
}
}
TIP: If you wanted to configure IP source guard on the voice VLAN as well as
on the data VLAN, you would configure DHCP snooping and IP source guard
exactly as you did for the data VLAN. The configuration result for the voice
VLAN under
secure-access-port
secure-access-port {
vlan voice {
examine-dhcp;
ip-source-guard;
}
}
To confirm that the configuration is working properly, perform these tasks:
Verifying That 802.1X User Authentication Is Working on the Interface on page 3116
Verifying the VLAN Association with the Interface on page 3117
Verifying That DHCP Snooping and IP Source Guard Are Working on the Data
VLAN on page 3117
Verifying That 802.1X User Authentication Is Working on the Interface
Verify the 802.1X configuration on interface
Verify the 802.1X configuration with the operational mode command
user@switch> show dot1x interface ge-0/0/14.0 detail
ge-0/0/14.0
Role: Authenticator
Administrative state: Auto
Supplicant mode: Single
Number of retries: 3
Quiet period: 60 seconds
Transmit period: 30 seconds
Mac Radius: Disabled
Mac Radius Restrict: Disabled
Reauthentication: Enabled
Configured Reauthentication interval: 3600 seconds
would look like this:
ge-0/0/14 .
show dot1x interface
Copyright © 2010, Juniper Networks, Inc.
: