Bulkstats Receiver Remote-Name - Juniper JUNOSE SOFTWARE 11.0.X - COMMAND REFERENCE A TO M 1-11-2010 Command Reference Manual

JUNOSe 11.0.x Command Reference Guide A to M

bulkstats receiver remote-name

bulkstats receiver receiverIndex remote-name remoteName.sts
Syntax
[ receiverAttrib [ receiverAttrib ]* ]
no bulkstats receiver receiverIndex [ remote-name remoteName ]
Command introduced before JUNOSe Release 7.1.0.
Release Information
Configures the bulk statistics receiver parameters. The no version deletes the receiver.
Description
Options
Global Configuration
Mode
338
bulkstats receiver remote-name
receiverIndex Number in the range 1–65535 that identifies the receiver of the
data
remoteName Composed of the remote host, path, filename, and formatters;
include a .sts filename extension
receiverAttrib One of the following dynamic attributes
sysName Inserts the router name into the stored remote filename
sysUpTime Inserts the router up time into the stored remote filename
collectorSequence Inserts a sequence number into the stored remote
filename
* Indicates that one or more parameters can be repeated multiple times in a
list in the command line