Juniper JUNOS OS 10.4 - FOR EX REV 1 Manual page 3203

Table 408: Components of Port Security Setup on Switch 1 with a DHCP Server Connected to
Switch 2
Properties
Switch hardware
VLAN name and ID
VLAN subnets
Trunk interface on both switches
Access interfaces on Switch 1
Access interface on Switch 2
Interface for DHCP server
Copyright © 2010, Juniper Networks, Inc.
Figure 81: Network Topology for Port Security Setup with Two Switches
on the Same VLAN
The components of the topology for this example are shown in Table 408 on page 3099.
Switch 1 is initially configured with the default port security setup. In the default
configuration on the switch:
Chapter 100: Examples: Port Security Configuration
Settings
One EX3200-24P (Switch 1), and an additional EX Series switch
(Switch 2)
employee-vlan , tag 20
192.0.2.16/28
192.0.2.17 through 192.0.2.30
192.0.2.31 is subnet's broadcast address
ge-0/0/11
ge-0/0/1 , ge-0/0/2 , and ge-0/0/3
ge-0/0/1
ge-0/0/1 on Switch 2
3099