Table of Contents
Advertisement
S e n d d o c u m e n t a t i o n c o m m e n t s t o m d s f e e d b a c k - d o c @ c i s c o . c o m .
Table 1
New and Changed Features for Release 2.x (continued)
Feature
AAA accounting log
IP Security (IPsec)
Internet Key Exchange
(IKE)
Call Home enhancements Provides message throttling capabilities, periodic
Port tracking
SAN extension (SET)
tuner
Command Scheduler
WWN changes
FC ID changes
Storing the last core to
flash
Cisco MDS 9000 Family Configuration Guide
xlvi
Description
Deprecates the aaa accounting logsize
command. The default size of the accounting log
is increased to 250,000 bytes and cannot be
changed.
Provides security services at the IP layer,
including protecting one or more data flows
between a pair of hosts, between a pair of security
gateways, or between a security gateway and a
host.
Allows IPsec to use the IKE protocol to handle
protocol and algorithm negotiation and to
generate the encryption and authentication keys
to be used by IPsec.
inventory messages, port syslog messages, and
RMON alert messages.
Uses information about the operational state of
the link to initiate a failure in the link that
connects edge device. This feature is unique to
the Cisco MDS 9000 Family.
Helps you optimize FCIP performance by
generating SCSI I/O commands and directing
such traffic to a specific virtual target. This
feature is unique to the Cisco MDS 9000 Family.
Helps you schedule configuration and
maintenance jobs in any switch in the Cisco MDS
9000 Family.
Uses WWNs during link initialization by the
Exchange Link Protocol (ELP) and the Exchange
Fabric Protocol (EFP).
Conserves the number of FC IDs used with a
special FC ID allocation scheme used by Cisco
MDS 9000 Family switches.
Enables the persistent Fibre Channel ID (FC ID)
feature is enabled by default.
Saves the last core dump (service core)
automatically to the Flash memory in the
/mnt/pss/ partition before the switchover or
reboot occurs.
New and Changed Information
Changed
in Release Where Documented
2.0(1b)
Chapter 28, "Configuring
RADIUS and TACACS+"
2.0(1b)
Chapter 30, "Configuring IPsec
Network Security"
2.0(1b)
Chapter 45, "Configuring Call
Home"
2.0(1b)
Chapter 48, "Configuring Port
Tracking"
2.0(1b)
Chapter 34, "Configuring the
SAN Extension Tuner"
2.0(1b)
Chapter 15, "Scheduling
Maintenance Jobs"
2.0(1b)
Chapter 25, "Advanced Features
and Concepts"
Chapter 14, "Configuring
Domain Parameters"
Chapter 4, "Initial
Configuration"
2.0(1b)
Chapter 50, "Monitoring System
Processes and Logs"
OL-6973-03, Cisco MDS SAN-OS Release 2.x
Advertisement
Table of Contents
