Table of Contents
Advertisement
New and Changed Information
S e n d d o c u m e n t a t i o n c o m m e n t s t o m d s f e e d b a c k - d o c @ c i s c o . c o m .
Table 1
New and Changed Features for Release 2.x (continued)
Feature
Zone-based QoS
Enhanced zoning
Distributed Device Alias
Services
Security
The snmp-server enable
traps fcdomain
command
RMON configuration
Multicast compliance
IP-ACL changes
IP storage
OL-6973-03, Cisco MDS SAN-OS Release 2.x
Description
Provides an additional segregation mechanism to
configure the Quality of Service (QoS) priority as
a zone attribute.
Provides compliance with FC-GS-4 and
FC-SW-3. Both standards support basic zoning
and enhanced zoning functionalities.
Allows you to distribute device alias names on a
fabric-wide basis.
Network operator default.
Administrator password must be configured.
Multiple roles support.
Advanced Encryption Standard usage.
Unified users and passwords.
The error-enabled command.
Allows you to enable a specific SNMP trap (for
example, fcdomain traps) notification.
Allows CLI configuration of RMON alarms and
events.
Allows interoperability with other vendor
switches. The Cisco SAN-OS software uses the
lowest domain switch as the root to compute the
multicast tree in interop mode.
Allows you to apply IP-ACLs to Gigabit Ethernet
interfaces (IPS modules) and Ethernet
PortChannel interfaces.
Tape acceleration.
iSNS server.
Mutual CHAP authentication.
FCIP compression enhancements.
Other changes (defaults).
Changed
in Release Where Documented
2.0(1b)
Chapter 19, "Configuring and
Managing Zones"
Chapter 47, "Configuring Fabric
Congestion Control and QoS"
Chapter 19, "Configuring and
Managing Zones"
2.0(1b)
Chapter 20, "Distributing Device
Alias Services"
2.0(1b)
Chapter 26, "Configuring Users
and Common Roles"
Chapter 27, "Configuring
SNMP"
Chapter 28, "Configuring
RADIUS and TACACS+"
Chapter 29, "Configuring IP
2.0(1b)
Access Control Lists"
Chapter 30, "Configuring IPsec
Network Security"
Chapter 31, "Configuring FC-SP
and DHCHAP"
Chapter 32, "Configuring Port
Security"
2.0(1b)
Chapter 42, "Configuring
RMON"
2.0(1b)
Chapter 21, "Configuring Fibre
Channel Routing Services and
Protocols"
2.0(1b)
Chapter 36, "Configuring IP
Services"
Chapter 37, "Configuring IP
Storage"
2.0(1b)
Chapter 37, "Configuring IP
Storage"
Cisco MDS 9000 Family Configuration Guide
xlv
Advertisement
Table of Contents
