Installation And Initial Settings; Location - Ricoh 2400L Operator's Manual

APPENDIX A INSTALLATION AND INITIAL SETTINGS

LOCATION

For the best possible performance, install your machine in a place which satisfies
the following conditions.
Not exposed to direct sunlight
Well ventilated (air turnover at least three times per hour); to avoid the build-up
of ozone, make sure to locate the machine in a large well-ventilated room
which has an air turnover of more than 30 yd
Level
Not subject to vibration
Away from other electronic equipment, to avoid interference
Away from areas containing corrosive gas
Dust-free
Condensation-free
Temperature 63 to 82 F
Humidity 40 to 70% RH (do not install near a humidifier)
Away from heaters and air conditioners, to avoid sudden changes of
temperature
Within 5 yards of a three-pin grounded
power outlet (115 Volts, 60 Hz)
With the clearance as shown on the right
NOTE: This machine generates a certain amount of ozone. Although the
amount generated is within safety requirements, it is recommended
that, to avoid ozone buildup, you install the machine in a room which
is properly ventilated.
3
/hr per person.
4"
4"
4"
28"
163