BGP Commands
ip bgp neighbor out-aspathlist
Assigns an outbound AS path filter list to a BGP peer.
ip bgp neighbor ip_address out-aspathlist {string | none}
Syntax Definitions
ip_address
string
none
Defaults
N/A
Platforms Supported
OmniSwitch 6850, 6855, 6850E, 9000E
Usage Guidelines
•
The AS path list name (OutboundASpath in the example below) is created using the
aspath-list
command. Any outbound routes from the BGP peer must match this AS path filter, or
policy, before being advertised or passed to outbound policy.
•
To deassign an output AS path filter list, use this command to assign a value of "none".
Examples
-> ip bgp neighbor 172.22.2.115 out-aspathlist OutboundASpath
-> ip bgp neighbor 172.22.2.115 out-aspathlist none
Release History
Release 6.1; command was introduced.
Related Commands
ip bgp policy aspath-list
MIB Objects
alaBgpPeerTable
alaBgpPeerAspathListOut
OmniSwitch CLI Reference Guide
32-bit IP address of the BGP peer.
Outbound AS path list (0 - 70 characters).
Removes the AS path list from the peer.
Creates or removes an AS path list.
June 2012
ip bgp policy
page 25-91